DTC P0113: Intake Air Temperature (IAT) Sensor 1 Circuit High
P0113 - INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT HIGH
| Description: | The DTC indicates the sensor signal is greater than the self-test maximum. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An IAT PID reading greater than self-test maximum with the ignition ON engine OFF or during any engine operating mode indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DA . | ||