DTC P0108: Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor High
P0108 - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR HIGH
| Description: | Sensor operating voltage is greater than 4.96 volts. As a result it failed above the maximum allowable calibrated parameter. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The VREF voltage should be between 4.0 and 6.0 volts. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| F-150 3.5L, Flex 3.5L GTDI, MKS 3.5L, MKT 3.5L, Taurus 3.5L GTDI |
GO to PINPOINT TEST DN . | ||
| All others | GO to PINPOINT TEST DM . | ||