LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus S, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0001 Through DTC P0217 - (Except Diesel & Hybrid) >> DTC P00C6: Fuel Rail Pressure Too Low - Engine Cranking

DTC P00C6: Fuel Rail Pressure Too Low - Engine Cranking

P00C6 - FUEL RAIL PRESSURE TOO LOW - ENGINE CRANKING

Description:  The high pressure fuel system must reach a minimum pressure threshold before the engine can be started. If the high pressure fuel system cannot achieve this threshold within certain time and crankshaft rotation limits, the powertrain control module (PCM) attempts to start the engine at fuel pump assembly pressure and sets DTC P00C6.
Possible Causes: 
  • Fuel filter plugged or dirty
  • Fuel supply line restricted
  • Damaged fuel pump assembly
  • Damaged fuel injection pump
Diagnostic Aids:  Diagnose any fuel rail pressure (FRP) and FVR circuit DTCs first.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST DD .