DTC P0096: Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1)
P0096 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT RANGE/PERFORMANCE (BANK 1)
| Description: | The powertrain control module (PCM) continuously monitors this sensor for concerns. This DTC sets when the intake air temperature 2 (IAT2) PID does not correlate with the charge air cooler temperature (CAC_T) or the intake air temperature (IAT) PIDs at ignition ON. It will also set if the IAT2 PID exceeds the maximum calibrated temperature threshold while driving. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The MAP/IAT2 sensor is located on top of the intake manifold. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST EA . | ||