Brake System - General Information: Specifications
MATERIAL
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) | WSS-M6C62-A or WSS-M6C65-A1 | 630 ml (1.33 pt) |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) | - | - |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A | - |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Disc | |
| Front brake disc minimum thickness | 23 mm (0.905 in) |
| Brake Drum | |
| Maximum brake drum diameter | 204 mm (8.031 in) |
| Brake Pads and Shoes | |
| Maximum brake shoe taper wear (in any direction) | 3.0 mm (0.118 in) |
| Minimum brake pad thickness | 3.0 mm (0.118 in) |
| Minimum brake shoe thickness | 3.75 mm (0.147 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-in |
|---|---|---|
| Brake caliper bleeder screw | 8 | 71 |
| Master cylinder brake tube fittings - vehicles equipped with ABS | 17 | 150 |
| Master cylinder brake tube fittings - vehicles not equipped with ABS | 20 | 177 |
| Wheel cylinder bleeder screw | 8 | 71 |