LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus S, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes >> Removal And Installation >> Instrument Cluster (IC) Lens >> Removal and Installation

Removal and Installation

  1. Remove the Instrument Cluster (IC). For additional information, refer to INSTRUMENT CLUSTER (IC) ..
  2. Remove the 2 IC lens screws.
  3. Release the tabs from the IC and remove the lens.
    Fig 1: Locating IC Lens Tabs
    G06437158Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.