LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus S, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Warning Chimes >> Safety Belt Warning Chime

Safety Belt Warning Chime

The safety belt warning chime warns that the driver safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened, the ignition lock cylinder is turned from the OFF/LOCK or ACC to the RUN or START position.

The safety belt warning chime stops sounding when the safety belt is fastened, when the ignition switch is turned from the RUN or START position to the OFF/LOCK or ACC position, or when the chime has sounded for approximately 6 seconds.

The safety belt warning chime inputs are the:

scientia non olet · About LEMON Manuals