IC Configuration
The IC contains items that are configurable. Configurable items include customer preference items, which can be set with a scan tool. The remaining items can be set only through the Programmable Module Installation (PMI) procedure using As-Built data. Refer to MODULE CONFIGURATION SYSTEM article.
NOTE:
When installing a new IC, it is necessary to upload the module configuration to the scan tool. Following installation of the IC download the module configuration from the scan tool into the new IC. Refer to
MODULE CONFIGURATION SYSTEM
article to carry out PMI. It is also necessary to carry out a parameter reset procedure whenever a new IC or PCM is installed. Refer to
ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS)
article.
IC CONFIGURATION PARAMETERS
| Customer Preference | As-Built Parameter |
|---|---|
| - | ABS/TC/IVD |
| - | Auto_unlock |
| - | Auto_lock |
| Belt-Minder® | - |
| - | Compass present |
| - | Default language |
| - | Engine type |
| - | Key-in-ignition warning chime |
| - | Oil life threshold |
| - | PCM oil life used |
| - | Service RSC® Now |
| - | Tank configuration |
| - | Tank selection |
| - | TPMS |