LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus S, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Removal And Installation >> Brake Drum >> Removal

Brake Drum: Removal

  1. Remove the wheel and tire. For additional information, refer to WHEEL AND TIRE .
  2. Remove and discard the dust cap.
  3. NOTE: Do not use power tools to remove the wheel hub nut or damage to the spindle may occur.
    NOTE: If the bearing inner race(s) become separated from the bearing assembly, a new bearing must be installed. Reassembly and installation of the bearing that has become disassembled will result in bearing failure.

    Remove and discard the wheel hub nut and remove the brake drum.

scientia non olet · About LEMON Manuals