Removal and Installation
NOTE:
The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system, including: whenever the roof opening panel motor has been removed from the roof opening panel system, the roof opening panel glass has been removed from the roof opening panel system, the roof opening panel assembly has been removed from the vehicle, a new roof opening panel motor has been installed, a new roof opening panel glass has been installed or a new roof opening panel assembly has been installed. For additional information, refer to ROOF OPENING PANEL MOTOR INITIALIZATION .
- Remove the roof opening panel glass. For additional information, refer to ROOF OPENING PANEL GLASS .
- Slide the roof opening panel shield forward halfway.
- Disengage the roof opening panel shield guide feet.
- Lift the front portion of the roof opening panel shield upward at center until able to disengage one of the front guide feet.
- With one of the guide feet released, carefully rotate the roof opening panel to disengage the remaining guide feet.
- To install, reverse the removal procedure.
- Initialize the roof panel opening motor. For additional information, refer to ROOF OPENING PANEL MOTOR INITIALIZATION .