LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus S, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof - Roof Opening Panel >> Removal And Installation >> Roof Opening Panel Motor >> Removal

Roof Opening Panel Motor: Removal

NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel system, including: whenever the roof opening panel motor has been removed from the roof opening panel system, the roof opening panel glass has been removed from the roof opening panel system, the roof opening panel assembly has been removed from the vehicle, a new roof opening panel motor has been installed, a new roof opening panel glass has been installed or a new roof opening panel assembly has been installed. For additional information, refer to ROOF OPENING PANEL MOTOR INITIALIZATION .
  1. Remove the LH and RH A- and B-pillar trim panels. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.
  2. Remove the roof opening panel headliner retainer (trim ring).
  3. Remove the LH and RH sun visors.
  4. Position aside the front door weatherstrip as necessary and lower the front portion of the headliner.
  5. Disconnect the roof opening panel motor electrical connector.
  6. Remove the 3 bolts and the roof opening panel motor.