LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus S, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Removal And Installation >> Bumper - Rear >> Removal and Installation

Removal and Installation

  1. Remove the rear bumper cover. For additional information, refer to BUMPER COVER - REAR .
  2. Remove the 4 rear bumper retainer nuts and the rear bumper.
    • To install, tighten to 20 Nm (177 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals