LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Focus L4-2.0L >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Backup Lamp Switch >> Service and Repair

Backup Lamp Switch: Service and Repair




Reversing Lamp Switch









Removal and Installation

1. Remove the battery tray. For additional information, refer to Battery, Mounting and Cables Battery Tray.

2. Disconnect the electrical connector and remove the reversing lamp switch.
- To install, tighten to 10 Nm (89 lb-in).

3. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals