Hood Latch: Service and Repair

Hood Latch

NOTE: Radiator grille shown removed for clarity.











Removal and Installation

1. NOTE: Mark the position of the hood latch prior to removing the hood latch bolts.

Remove the 2 bolts and position the hood latch aside to gain access to the hood latch release cable.

- To install, tighten to 11 Nm (97 lb-in).

2. Disconnect the hood latch release cable and remove the hood latch.

3. To install, reverse the removal procedure.
- When the hood latch is installed, the latch adjustment must be checked to make sure the latch is aligned correctly.