- All the chimes are inoperative
|
- Instrument Panel Cluster (IPC)
|
|
- The chime sounds when the driver door is ajar (no key in ignition and headlamps off)
|
- Wiring, terminals or connectors
- Key-in-ignition warning switch (without Intelligent Access (IA))
- Body Control Module (BCM)
|
|
- The key-in-ignition warning chime is inoperative
|
- Wiring, terminals or connectors
- Key-in-ignition warning switch (without IA
)
- BCM
- IPC
|
|
- The headlamps on warning chime is inoperative
|
- Door ajar indication
- BCM
- IPC
|
|
- The door ajar warning chime is inoperative
|
- Wiring, terminals or connectors
- BCM
- IPC
|
- OPEN the driver door and OBSERVE the door ajar warning indicator.
- If the door ajar warning indicator does not operate correctly, go to PINPOINT TEST W .
- If the door ajar warning indicator operates correctly, INSTALL a new IPC
. Refer to INSTRUMENT PANEL CLUSTER (IPC) in this information. TEST the system for normal operation.
|
- The safety belt warning chime is inoperative
|
- Safety belt warning indication concern
- Speedometer concern
- IPC
|
|
- The Belt-Minder® feature does not operate
|
- Belt-Minder® deactivated
- Safety belt warning indication concern
- Speedometer concern
- IPC
|
|
- The parking brake warning chime is inoperative
|
- Brake warning indication concern
- IPC
|
|
- The turn signal/hazard on tone is inoperative
|
- Turn signal indication concern
- IPC
|
- VERIFY that the turn signal indicator operates correctly.
- If the turn signal indicator does not operate correctly, go to PINPOINT TEST X .
- If the turn signal indicator operates correctly, INSTALL a new IPC
. Refer to INSTRUMENT PANEL CLUSTER (IPC) . TEST the system for normal operation.
|