Brake Shift Interlock Override
WARNING: This page is about a different variant/trim than selected.
NOTE:
If PARK is selected again, the selector lever is locked again.
If the brake signal should fail due to a malfunction, manual unlocking of the selector lever is possible.
For this, the release of the mechanism must be done by removing the side console panel and using a suitable tool press the BSIA lever until the selector lever can be moved out of PARK.
If the brake signal should fail due to a malfunction, manual unlocking of the selector lever is possible.
For this, the release of the mechanism must be done by removing the side console panel and using a suitable tool press the BSIA lever until the selector lever can be moved out of PARK.