LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F50 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> Diagnostic Routine(S) >> Diagnostic Routine AO >> Pinpoint Test

Pinpoint Test

  1. CHECK THE SAFETY BELT WARNING CHIME OPERATION
    1. Ignition OFF.
    2. Ignition ON.
    3. Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN.
    • Does the safety belt warning chime operate for approximately 6 seconds? 
    1. Yes:  GO to 2  on page 2.
    2. No:  INSTALL a new Instrument Panel Cluster (IPC). REFER to INSTRUMENT PANEL CLUSTER (IPC) .
  2. CHECK THE TURN SIGNAL INDICATOR OPERATION
  1. Operate the turn signals.
  1. Yes:  INSTALL a new Instrument Panel Cluster (IPC). REFER to INSTRUMENT PANEL CLUSTER (IPC) .
  2. No:  REFER to Diagnostic Routine P .
scientia non olet · About LEMON Manuals