DTC P0180: Fuel Temperature Sensor A Circuit
WARNING: This page is about a different variant/trim than selected.
P0180 - FUEL TEMPERATURE SENSOR A CIRCUIT
| Description: | The comprehensive component monitor (CCM) monitors the fuel temperature sensor circuit to the powertrain control module (PCM) for low and high voltage. The test fails if the voltage falls below or exceeds a calibrated limit and amount of time during testing. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Verify the FRT PID value to determine an open or short. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DD . | ||