LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Power Transfer Unit (PTU)) >> Installation >> Intermediate Shaft Seal >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOL DESCRIPTION

G07443064
 Handle 205-153 (T80T-4000-W)
G07443065
 Installer, PTO Driven Gear Oil Seal 308-429
  1. Using the Handle and PTO Driven Gear Oil Seal Installer, install the intermediate shaft seal.
    Fig 1: Installing Intermediate Shaft Seal
    G07443066Courtesy of FORD MOTOR CO.
  2. Install the Power Transfer Unit (PTU). For additional information, refer to POWER TRANSFER UNIT (PTU)  in this service information.
scientia non olet · About LEMON Manuals