DTC P2104: Throttle Actuator Control (TAC) System - Forced Idle
WARNING: This page is about a different variant/trim than selected.
P2104 - THROTTLE ACTUATOR CONTROL (TAC) SYSTEM - FORCED IDLE
| Description: | The TAC system is in the failure mode effects management (FMEM) mode of forced idle. | ||
| Possible Causes: | |||
| Diagnostic Aids: | This DTC is an informational DTC and may set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST QE . | ||