DTC P2088: A Camshaft Position Actuator Control Circuit Low Bank 1
WARNING: This page is about a different variant/trim than selected.
P2088 - A CAMSHAFT POSITION ACTUATOR CONTROL CIRCUIT LOW BANK 1
| Description: | The powertrain control module (PCM) monitors the variable camshaft timing (VCT) circuit for high and low voltage. The test fails if the voltage exceeds a calibrated limit for a calibrated amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HK . | ||