DTC P145E: PCV Heater Control B Circuit
WARNING: This page is about a different variant/trim than selected.
P145E - PCV HEATER CONTROL B CIRCUIT
| Description: | This DTC sets when the powertrain control module (PCM) detects the actual PCVHF circuit voltage is less than or greater than the desired voltage. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Inspect the connectors for signs of damage, water ingress, or corrosion. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HG . | - | - |