DTC P0088: Fuel Rail/System Pressure - Too High
WARNING: This page is about a different variant/trim than selected.
P0088 - FUEL RAIL/SYSTEM PRESSURE - TOO HIGH
| Description: | The powertrain control module (PCM) regulates the fuel rail pressure by controlling the fuel volume regulator. When the PCM is no longer capable of maintaining the fuel pressure within the calibrated parameters, the DTC is set. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HP . | ||