LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Hybrid, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Manual Transaxle And Clutch - General Information) >> Diagnosis And Testing >> Manual Transaxle and Clutch >> Component Tests >> Clutch Drag

Clutch Drag

WARNING: This page is about a different variant/trim than selected.
  1. Verify that the clutch hydraulic fluid reservoir is filled to the correct level.
    • If the fluid level is correct, proceed to the next step in this procedure.
    • If the fluid level is low, add fluid as necessary. Inspect the clutch hydraulic system for leaks and repair as necessary. Refer to CLUTCH CONTROLS article. Test the system for normal operation.
  2. Depress and release the clutch pedal to check for a spongy pedal.
    • If the pedal feels OK, proceed to the next step in this procedure.
    • If the pedal feels spongy, bleed the clutch hydraulic system. Refer to CLUTCH SYSTEM BLEEDING  in this service information. Test the system for normal operation.
  3. Remove the clutch disc and pressure plate. Refer to CLUTCH article. Inspect the clutch disc and pressure plate for wear and damage, and check the clutch disc runout. Refer to CLUTCH DISC CHECK  in this service information. Repair all components as necessary.
scientia non olet · About LEMON Manuals