Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Camshaft Position (CMP) sensor bolt | 10 | - | 89 | ||
| Catalyst Monitor Sensor (CMS) (1) | - | - | - | ||
| Crankshaft Position (CKP) sensor bolt | 10 | - | 89 | ||
| Cylinder Head Temperature (CHT) sensor | 11 | - | 97 | ||
| Heated Oxygen Sensor (HO2S) (1) | - | - | - | ||
| Knock Sensor (KS) | 48 | 35 | - | ||
| KS (block mounted) bolt | 25 | 18 | - | ||
| KS (cylinder head mounted) bolt | 25 | 18 | - | ||
| LH splash shield bolts | 10 | - | 89 | ||
| Manifold Absolute Pressure (MAP) sensor bolt | 6 | - | 53 | ||
| Mass Air Flow (MAF) sensor screws | 2 | - | 18 | ||
| PCM stud bolts | 8 | - | 71 | ||
| Variable Camshaft Timing (VCT) oil control solenoid bolts | 10 | - | 89 | ||
|
|||||