Coolant Pump Belt: Installation

WARNING: This page is about a different variant/trim than selected.

Install the coolant pump belt on the coolant pump pulley and position it on the camshaft pulley.

Fig 1: Locating Coolant Pump Belt
Courtesy of FORD MOTOR CO.
NOTE: Do not use any screwdrivers, pliers or other metal objects that could cause damage to the belt or camshaft pulley while installing the belt.

Rotate the crankshaft clockwise to seat the coolant pump belt on the camshaft pulley.

Fig 2: Rotating Crankshaft Clockwise
Courtesy of FORD MOTOR CO.
Install the RH lower splash shield, pin-type retainer and 5 bolts.