LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Anti-Theft - Passive Anti-Theft System (Pats) (Hybrid)) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the steering column opening cover. For additional information, refer to Instrument Panel - Exploded View in INSTRUMENT PANEL article.
  2. Remove the 3 screws and the lower steering column shroud.
  3. Using a suitable tool such as a dentist pick, release the 2 tabs and remove the Passive Anti-Theft System (PATS) transceiver.
    • Disconnect the electrical connector.
    4. NOTE: Replacement of the PATS  transceiver does not require the PATS  keys to be programmed into the Instrument Cluster (IC) again.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals