LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Anti-Theft - Passive Anti-Theft System (Pats) (Hybrid)) >> General Procedures >> MyKey™ Programming >> Check MyKey™ System Status

Check MyKey™ System Status

WARNING: This page is about a different variant/trim than selected.
  1. The vehicle system check provides the status of the following MyKey™ parameters:
    • MYKEY DISTANCE - This odometer only tracks mileage when a MyKey™ is used. If mileage does not accumulate, the intended MyKey™ is not being used or the IC  is at fault. The only way to reset this odometer to zero is by disabling the MyKey™. If this odometer is lower than the last time it was checked, the MyKey™ system has been cleared. If desired, it may be necessary to program the MyKey™ restricted features into the key.
    • # MYKEY(S) PROGRAMMED - Indicates how many MyKeys™ are programmed to the vehicle. It can also be used to determine if a MyKey™ has been disabled.
    • # ADMIN KEYS PROGRAMMED - Indicates how many admin keys are programmed to the vehicle. It can also be used to determine if an additional spare key has been programmed to the vehicle.