General Specifications

WARNING: This page is about a different variant/trim than selected.

GENERAL SPECIFICATIONS

Item

Specification

A/C Pressure Relief Valve ⁽¹⁾

Close pressure

3,103 kPa (450 psi)

Open pressure

3,792-4,137 kPa
(550-600 psi)

⁽¹⁾	Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch or the pressure cutoff switch location.

NOTE: The specifications apply to hybrid vehicles only. For non-hybrid specifications, refer to CLIMATE CONTROL SYSTEM - GENERAL INFORMATION AND DIAGNOSTICS article.