LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transmission (6F35) (Except Hybrid)) >> Diagnosis And Testing >> Torque Converter Diagnosis >> Torque Converter Operation Test

Torque Converter Operation Test

WARNING: This page is about a different variant/trim than selected.

This test verifies the Torque Converter Clutch (TCC) control system and the torque converter are operating correctly.

  1. Carry out self-test and check for DTCs.
  2. Connect the scan tool and monitor engine rpm.
  3. Bring the engine to normal operating temperature by driving the vehicle at highway speeds with the selector lever in the (D) position.
  4. If the vehicle stalls in (D) at idle with the vehicle at a stop, move the selector lever to manual L position. If the vehicle stalls, see TORQUE CONVERTER OPERATION CONCERNS , refer to DIAGNOSIS BY SYMPTOM  in this service information. Repair as required. If the vehicle does not stall in (D), refer to DIAGNOSIS BY SYMPTOM  in this service information.
scientia non olet · About LEMON Manuals