Solenoid Body Identification Procedure
WARNING: This page is about a different variant/trim than selected.
- Using the scan tool, select Powertrain, Transmission and Transmission Solenoid Body Identification from the toolbox icon and follow the instructions displayed on the scan tool.
The solenoid body identification screen displays solenoid body identification information:
- Solenoid body identification 7-digits
- Solenoid body strategy 13-digits
The next screen displays the current solenoid body identification and strategy data file stored in the PCM. If the solenoid body strategy field is blank, the module contains a partial transmission solenoid body strategy. This is due to a corrupt or missing file at the time the programmable parameters were completed.
- Compare the solenoid body identification and strategy (if available) to the solenoid body service tag or the replacement solenoid body tag located on top of the transaxle case.
NOTE:
The 13-digit solenoid body strategy number consists of only numbers. Letters are not used.