LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transmission (6F35) (Except Hybrid)) >> Assembly >> Transaxle >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOL DESCRIPTION

G07444463Courtesy of FORD MOTOR CO.
 Compressor, Forward Clutch Spring
307-574 (includes 307-574/1 and 307-574/2)
G07444464Courtesy of FORD MOTOR CO.
 Compressor, Forward/Intermediate Spring
307-584 (includes 307-584/1 and 307-584/2)
G07444465Courtesy of FORD MOTOR CO.
 Dial Indicator Gauge With Holding Fixture
100-002 (TOOL-4201-C)
G07444466Courtesy of FORD MOTOR CO.
 Handle
205-153 (T80T-4000-W)
G07444467Courtesy of FORD MOTOR CO.
 Handle, Torque Converter
307-091 (T81P-7902-C)
G07444468Courtesy of FORD MOTOR CO.
 Holding Fixture
307-625
G07444469Courtesy of FORD MOTOR CO.
 Input Shaft Support Seal Installer (Back Plate, Multiple Rings)
307-578 (includes 307-578/1, 307-578/2 and 307-578/3)
G07444470Courtesy of FORD MOTOR CO.
 Installer, Bushing
307-664
G07444471Courtesy of FORD MOTOR CO.
 Installer, Differential Seal
307-626
G07444472Courtesy of FORD MOTOR CO.
 Installer, RH Halfshaft Fluid Seal
307-428
G07444473Courtesy of FORD MOTOR CO.
 Manual Lever Seal Installer
307-581
G07444474Courtesy of FORD MOTOR CO.
 Retainer, Torque Converter
307-566
G07444475Courtesy of FORD MOTOR CO.
 Seal Protector, 2-6 Piston
307-632
G07444476Courtesy of FORD MOTOR CO.
 Seal Protector, Turbine Shaft
307-635
G07444477Courtesy of FORD MOTOR CO.
 Shim Selection Gauge
307-300 (T94P-77000-Q) (17-055)
G07444478Courtesy of FORD MOTOR CO.
 Spring Compressor, 2-6 Piston Return
307-633 (Includes 307-633/1 and 307-633/2)
scientia non olet · About LEMON Manuals