LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 2.5L (Hybrid)) >> In-Vehicle Repair >> Engine Front Cover >> Material Specifications

Material Specifications

WARNING: This page is about a different variant/trim than selected.
MATERIAL SPECIFICATIONS

Item Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada)
XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada)
WSS-M2C945-A
Silicone Gasket and Sealant
TA-30
WSE-M4G323-A4
Fig 1: Exploded View Of Engine Front Cover With Torque Specifications
G07441707Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 6700 Crankshaft front seal
2 W500221 Coolant pump pulley bolt (3 required)
3 8509 Coolant pump pulley
4 14A464 Crankshaft Position (CKP) sensor electrical connector (part of 12B637)
5 W701219 CKP  sensor bolt (2 required)
6 6C315 CKP  sensor
7 W500328 Engine front cover bolt (3 required)
8 W500320 Engine front cover bolt
9 W705310 Engine front cover stud bolt
10 W500215 Engine front cover bolt (16 required)
11 6019 Engine front cover
12 14A163 Transaxle shift cable routing retainer (part of 7E395)