Safety Belt Warning Chime
The safety belt warning chime warns that the safety belt is not fastened. The safety belt warning chime sounds when the driver safety belt is not fastened and the ignition lock cylinder is turned from the OFF/LOCK or ACC to the ON or START position.
The safety belt warning chime stops sounding when the safety belt is fastened, when the ignition switch is turned from the ON or START position to the OFF/LOCK or ACC position, or when the chime has sounded for approximately 6 seconds.
The safety belt warning chime inputs are:
- Ignition state.
- Driver safety belt warning chime request communicated by the RCM to the IC through the HS-CAN .