Pinpoint Test Ar: The Parking Brake Warning Chime Is Inoperative
- AR1 CHECK THE KEY-IN-IGNITION WARNING CHIME OPERATION
- Ignition OFF.
- With the ignition switch in the OFF position and the key in the ignition lock cylinder, open the LH front door and observe the key-in-ignition warning chime operation.
- Does the key-in-ignition warning chime operate correctly?
- Yes:
GO to AR2
.
- No:
INSTALL a new IC
. REFER to INSTRUMENT CLUSTER (IC) in this service information. TEST the system for normal operation.
- AR2 CHECK THE BRAKE WARNING INDICATOR FOR CORRECT OPERATION
- Ignition ON.
- Apply and release the parking brake.
- Does the brake warning indicator turn on when applied and turn off when released?
- AR3 CHECK THE SPEEDOMETER FOR CORRECT OPERATION
- Ignition ON.
- Drive the vehicle and verify that the speedometer is operating correctly.
- Does the speedometer operate correctly?
- AR4 RETRIEVE THE RECORDED DTCs FROM THE SJB SELF-TEST
- Check for recorded SJB
DTCs from the self-test.
- Are any DTCs recorded?