LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Drum Brake System >> Removal And Installation >> Brake Drum >> Removal

Brake Drum: Removal

  1. Remove the wheel and tire. For additional information, refer to TIRES & WHEELS article.
  2. NOTE: Use of a brake drum puller or a torch is not recommended. Brake drum distortion can result.
    NOTE: If the brake drum is seized to the wheel hub pilot diameter, tap the center of the brake drum between the wheel studs.
  3. If the brake drum binds on the brake shoes, retract the brake shoes.
    1. Move the brake shoe adjuster actuator lever away from the adjuster.
    2. Rotate the brake shoe adjuster screw upward to retract the brake shoes.
      Fig 1: Identifying Brake Shoe Adjuster Actuator Lever And Brake Shoe Adjuster Screw
      G06094441Courtesy of FORD MOTOR CO.
  4. Remove the brake drum.