LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Removal And Installation >> Bumper - Rear, Without Trailer Hitch >> Removal and Installation

Removal and Installation

  1. Remove the rear bumper cover. For additional information, refer to BUMPER COVER - REAR  in this service information.
  2. Remove the 4 rear bumper nuts.
    • To install, tighten to 40 Nm (30 lb-ft).
  3. Remove the rear bumper.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals