LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Panel System - Front End Body Panels >> Removal And Installation >> Cowl Panel Grille >> Removal and Installation

Removal and Installation

  1. Remove the 2 wiper pivot arms nuts.
    • To install, tighten to 35 Nm (26 lb-ft).
  2. Remove the LH and RH wiper pivot arms.
  3. Remove the LH and RH cowl end cap pushpin retainers.
  4. Remove the cowl end caps.
  5. Release the cowl panel grille from the retaining clips and remove the cowl panel grille.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals