LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System, Message Center & Warning Chimes >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Principles of Operation >> Instrument Cluster (IC) >> IC Configuration

IC Configuration

The IC  contains items that are configurable. Configurable items include customer preference items, which can also be set with a scan tool. The remaining configurable items can only be set by the Programmable Module Installation (PMI). Refer to MODULE CONFIGURATION article.

NOTE: When installing a new IC  , it is necessary to upload the module configuration to the scan tool. Following installation of the IC  , download the module configuration from the scan tool into the new IC  . Refer to MODULE CONFIGURATION article. It is also necessary to carry out a parameter reset procedure whenever a new IC  or PCM is installed. Refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) - HYBRID article.

The configurable customer preference items are as follows:

scientia non olet · About LEMON Manuals