Instrument Cluster (IC): MyKey™

The MyKey™ feature allows the customer to program a restricted driving mode that is tied to one or more keys known as a MyKey™. When a MyKey™ is in use, the IC  provides the following functions:

• At beginning of vehicle start up, as part of the welcome strategy, the message center greets the MyKey™ driver with MyKey™ ACTIVE DRIVE SAFELY displayed in the message center. If the MyKey™ speed limiter feature is turned on, the message center also displays SPEED LIMITED TO 80 MPH (or 130 km/h).
• The IC  continuously provides a periodical Belt-Minder® warning chime until the driver and passenger safety belts are buckled. When the Belt-Minder® is issued, the ACM  is muted and the message center displays BUCKLE UP TO UNMUTE RADIO.
• If the MyKey™ speed limiter feature is turned on and the vehicle speed approaches 130 km/h (80 mph), the message center displays VEHICLE SPEED 80 MPH MAX along with a chime.
• If the MyKey™ speed limiter feature is turned on and the vehicle speed approaches 120 km/h (75 mph), the message center displays VEHICLE NEAR TOP SPEED along with a chime.
• If the speed warning is selected at one of the pre-set values (75, 90, 105 km/h [45, 55, 65 mph]) and the vehicle approaches the pre-set speed, the message center displays CHECK SPEED DRIVE SAFELY along with a chime.
• If the traction control always on feature is turned on and the MyKey™ driver presses the traction control switch to disable traction control, the message center displays ADVTRAC ON MyKey™ SETTING.
• At 120 km (75 miles) to empty, the IC  illuminates the low fuel indicator (if equipped) and the message center displays 75 MILES TO EMPTY along with a chime
• MyKey™ mileages driven by the MyKey™ user can be found in the INFO display and in the system check function of the message center.
• The number of MyKey™ programmed and admin keys can be found in the system check function of the message center.
• The parking aid, Blind Spot Information System (BLIS®) with Cross Traffic Alert (CTA) (if equipped) and collision avoidance (if equipped) warning menus are disabled in the message center to force these features always on.

When an admin key is in use, the IC  provides the following functions:

• The message center provides a menu that guides the user to create a MyKey™. When the maximum MyKey™ limit is reached, the MyKey™ creation menu is no longer available.
• The message center provides menus for setting 4 optional MyKey™ features:
  • MyKey™ 80 MPH speed limiter
  • MyKey™ pre-selected speed warning
  • MyKey™ radio volume limiter
  • AdvanceTrac® on/off
• The message center provides a menu to clear all MyKey™ programmed keys at once.
• MyKey™ mileages driven by the MyKey™ user can be found in system check function of the message center.
• The number of MyKey™ and admin keys can be found in the system check function of the message center.

Refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) - HYBRID article for additional information on the MyKey™ features.