Setup Displays

The setup (SETUP button) displays are timed modes and terminate after a finite interval. As part of the setup menu, the message center has the capability to configure items such as units (English or metric), autolamp delay, to enable/disable a variety of options such as autolock and auto-unlock, or to carry out calibrations/settings on items such as oil life.

On configurable items such as autolock and auto-unlock, the message center indicates the appropriate selection (ON/OFF) by bracketing the selection. For example, if the driver selects the autolock feature on, the message would display as follows: AUTOLOCK OFF. If the driver selects the autolock off, the message would display as follows: AUTOLOCK ON. For additional information on configurable items, refer to the Owner's Literature.

The setup display modes are:

• Reset to English (if set in another language)
• System check
• Oil life reset/oil life starting value
• Units English/metric
• Autolamp delay in seconds (if equipped)
• Autolock on/off
• Auto-unlock on/off
• Language