LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Removal And Installation >> Instrument Panel Finish Panel - Center, Middle >> Removal and Installation

Removal and Installation

  1. Remove the upper instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL FINISH PANEL - CENTER, UPPER  in this service information.
  2. Remove the lower instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL FINISH PANEL - CENTER, LOWER  in this service information.
  3. Remove the 4 middle instrument panel center finish panel screws.
  4. Remove the middle instrument panel center finish panel in the following sequence.
    1. Pull outward to release the retaining clips.
    2. Disconnect the electrical connectors.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals