LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Escape 2WD L4-2.5L >> Repair and Diagnosis >> Lighting and Horns >> Sensors and Switches - Lighting and Horns >> Backup Lamp Switch >> Service and Repair

Backup Lamp Switch: Service and Repair




Reversing Lamp Switch









Removal and Installation

1. Disconnect the reversing lamp switch electrical connector.

2. Remove the reversing lamp switch.
- To install, tighten to 24 Nm (18 lb-ft).

3. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals