Intelligent Access (IA) with Push Button Start Ignition Modes
The IA feature does not require a conventional key to enter or start the vehicle. Once inside the vehicle, the operator activates one of the ignition modes using the brake pedal and the push button start (start/stop) switch, as follows:
INTELLIGENT ACCESS WITH PUSH BUTTON START IGNITION MODES CHART
| Ignition Entry Condition | Desired Ignition Modes | Action |
|---|---|---|
| Ignition off | Accessory | Press the start/stop switch without pressing the brake pedal. |
| Ignition off | On (engine off) | Press the start/stop switch twice without pressing the brake pedal. |
| Any ignition mode | Start | Press and hold the brake pedal and then press the start/stop switch. |
| On (engine off) | Ignition off | Press the start/stop switch. On some vehicles, the ignition turns off automatically after 30 minutes. |
| On (vehicle in motion) | Ignition off | Press and hold the start/stop switch for approximately 1 second. On some vehicles, press the start/stop switch 3 times within 2 seconds. |