LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2011 >> Edge SEL, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Parking Aid System >> Removal And Installation >> Parking Aid Sensor

Parking Aid Sensor

Fig 1: Identifying Parking Aid Sensor And Electrical Connectors Location
G07402459Courtesy of FORD MOTOR CO.
PARTS DESCRIPTION CHART

Item Part Number Description
1 - Parking aid sensor electrical connectors (part of 14N139)
2 15K859 Parking aid sensors
  1. Remove the rear bumper cover. For additional information, refer to BUMPERS .
  2. Disconnect the parking aid sensor(s) electrical connector(s).
  3. Press the retaining tabs and remove the parking aid sensor(s).
  4. To install, reverse the removal procedure.