IPC Prove-Out
The IPC and other vehicle modules carry out a display prove-out to verify all module controlled warning/indicator lamps and monitored systems are functioning correctly within the IPC . The IPC and other modules, such as the Restraints Control Module (RCM), provide a timed prove-out while other indicators illuminate until engine start up. When the ignition switch is cycled to the ON position with the engine off, the indicators illuminate to prove-out according to the following table:
INDICATORS INFORMATION
| Indicator | Indicator Type | Prove-Out Duration |
|---|---|---|
| ABS | Warning | 3 seconds |
| Air bag | Warning | 6 seconds |
| Brake | Warning | 3 seconds |
| Fog (MKX only) | Informational | None |
| High beam indicator | Informational | None |
| Malfunction Indicator Lamp (MIL) | Warning | Engine startup |
| Safety belt warning indicator | Warning | 70 seconds if the safety belt is unbuckled, turns off when the safety belt is buckled |
| Stability/traction control indicator | Warning | 3 seconds |
| Stability/traction control disabled indicator | Informational | 3 seconds |
| TPMS warning indicator | Warning | 3 seconds |
| RH/LH turn indicators | Informational | None |