Pinpoint Test Ag: The Compass Is Inaccurate (Without Sync®)
- AG1 CHECK THE COMPASS ACCURACY
- Position the vehicle and observe the compass display as follows:COMPASS DISPLAY INFORMATION
Direction Compass Display North N Northeast NE East E Southeast SE South S Southwest SW West W Northwest NW - Does the compass display as indicated?
- Yes: The compass is operating correctly at this time.
- No: GO to AG2 .
- Position the vehicle and observe the compass display as follows:
- AG2 CHECK THE COMPASS ZONE SETTING AND CALIBRATION
- Set the zone. Refer to COMPASS ZONE ADJUSTMENT .
- Calibrate the compass. Refer to COMPASS CALIBRATION .
- Does the compass calibrate correctly?
- Yes: The compass is OK. The concern may have been cause by an incorrect zone setting or calibration concern.
- No: INSTALL a new auto-dimming interior mirror. REFER to REAR VIEW MIRRORS . TEST the system for normal operation. SET the zone. REFER to COMPASS ZONE ADJUSTMENT . CALIBRATE the compass. REFER to COMPASS CALIBRATION . CLEAR the DTCs. REPEAT the self-test.