Global Open - MKX Only
NOTE:
The global open feature may be enabled/disabled via scan tool or in some cases modified by the customer following a procedure listed in the Owner's Literature. For a complete list of available programmable parameters, refer to the Module Configuration and Parameter Chart in
MODULE CONFIGURATION
.
The Body Control Module (BCM) sends a signal on the global open circuit to open the power windows and roof opening sliding glass panel based on a signal received from the Remote Keyless Entry (RKE) transmitter. When the roof opening sliding glass panel motor receives the global open request, the shade panels automatically move to the fully OPEN position (if shades are not already fully open), followed by the sliding glass panel moving to the VENT position. The global open feature is inoperative if the accessory delay relay is active.