IKT Without Remote Start and Power Liftgate
The vehicle comes equipped from the factory with 2 programmed IKT s. The IKT incorporates both the PATS and the Remote Keyless Entry (RKE) transmitter functions in a single device. During key programming procedures, the PATS and RKE transmitter of an IKT are both programmed into the BCM . In addition to the IKT s, conventional PATS keys can also be programmed to the vehicle if requested by the customer. The BCM accepts the programming of up to 8 keys. Of those 8 keys a maximum of 4 IKT s can be programmed. If more than 4 IKT s are programmed, INT KEY COULD NOT PROGRAM is displayed in the message center during the key programming procedure and the RKE function of that IKT is non-functional. Refer to Key Programming Using Diagnostic Equipment or KEY PROGRAMMING - PROGRAM A KEY USING TWO PROGRAMMED KEYS for the key programming procedures.