Wiper Motor - Rear Window

Wiper Motor - Rear Window

Removal

1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm- Rear Wiper Pivot Arm - Rear.

2. Remove the liftgate trim panel.

3. Disconnect the rear wiper motor electrical connector.

4. Remove the 3 rear wiper motor screws.

5. Remove the rear wiper motor.

Installation

1. Position the rear wiper motor on the liftgate and install the 3 rear wiper motor screws.
- Tighten to 8 Nm (71 lb-in).


2. Connect the rear wiper motor electrical connector.

3. Install the liftgate trim panel.

4. Install the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm- Rear Wiper Pivot Arm - Rear.